Canon Pixma Ip4000 Software Download for Mac Updated

Canon Pixma Ip4000 Software Download for Mac

Commodity ID: ART137634 | Date published: 05/13/2015 | Date final updated: 03/19/2020

Description

Understand and resolve errors on the iP4000 based on the number of orange alarm lamp flashes on the printer.

Solution

When an fault occurs you lot will run into flashing lights on your printer panel. Depending on the error, a support code error number and message may also display on your computer screen.

The light(s) on your printer panel may flash as follows:

Repeatedly orange: If so, count the number of flashes and refer to Table 1 below.
Alternately between greenish and orange: If then, count the number of flashes and refer to the Tabular array two below.

Table 1: Low-cal flashes repeatedly orange

Flashes	Crusade	Activeness
Two (ii)	Printer is out of paper. Paper does not feed.	Reload paper in the sheet feeder or cassette and tapRESUME/CANCEL.
Three (three)	Paper output tray is airtight.	If paper is jammed , remove the jammed paper, reload paper in the printer, so tap RESUME/CANCEL. If the paper output tray is closed, open it.
Four (4)	Empty ink tank.	TapRESUME/CANCEL continue printing with an empty ink tank. Supplant it with a new ink tank immediately later the press. It may damage the printer if you lot continue press with an empty ink tank.
Five (5)	Print head not installed. Print head not installed correctly. Print caput is lacking.	Install the print head. If the print head is already installed, remove information technology and check the electric contacts for foreign matter, then reinstall. After y'all reinstall the impress caput, you may need to realign information technology. If this error still remains, the print head may be damaged.
Vi (vi)	Inner cover error.	Close the inner cover, then tapRESUME/Abolish to start printing.
Eight (8)	Waste ink absorber almost full.	The printer has a built-in waste ink absorber for the ink used when the impress head is cleaned. Tap RESUME/Cancel to cancel the error and then you tin go along to print.
Nine (9)	A specified period of time has elapsed without a response from the digital photographic camera or digital video camcorder. The digital camera or digital video camcorder connected is not compatible with this printer.	Disconnect the camera cablevision. Tap RESUME/Abolish and reconnect the cable. If the error is even so unresolved, the digital photographic camera or digital video camcorder may not be supported by the printer. Use a digital photographic camera or digital video camcorder that is uniform with this printer.
Ten (ten)	Can't impress on sides of the page.	The size of paper may not be compatible with automatic duplex printing. Tap RESUME/Abolish to belch the newspaper, and restart impress from the front side of the side by side paper. The reverse side won't be printed when an error occurs.
Eleven (eleven)	Automatic Print Caput alignment failed.	Load paper. Replace or reinstall the ink tanks. Tap RESUME/CANCEL. Print a nozzle cheque design . Align the printer so the newspaper output slot won't exist exposed direct to a strong light source. If the problem continues after yous align the print caput over again, tap RESUME/Abolish to resolve the fault, and and so perform manual print head alignment .

Table ii: Light flashes alternately between dark-green and orange

Flashes	Cause	Action
Orange and Green alternates.	Fault has occurred.	Disconnect the printer cable from the printer, and and then turn the printer off and unplug the printer from the power supply. Plug the printer dorsum in and plough the printer back on afterwards it has been unplugged for a while.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Business relationship to come across your technical support options.

Or if y'all all the same need assistance, visit our Catechism Community by clicking the button beneath to get answers: